Wanted. edlebrock performer 289 manifold & 260 timing co

Post small ads for Alpine and Tigers parts.
Post Reply
tigertim
Posts: 85
Joined: Mon May 25, 2015 11:06 pm
Location: Kent

Wanted. edlebrock performer 289 manifold & 260 timing co

Post by tigertim » Fri Jul 22, 2016 11:16 pm

Wanted. edlebrock 289 performer inlet manifold, and 260 or early 289 timing cover.

Brad1380
Posts: 547
Joined: Wed Apr 27, 2011 1:38 pm

Post by Brad1380 » Sat Jul 23, 2016 1:36 pm

I've an Eldelbrock Torker 2 spare if thats any help.
1966 Sunbeam Tiger Mk1

tigertim
Posts: 85
Joined: Mon May 25, 2015 11:06 pm
Location: Kent

Post by tigertim » Sat Jul 23, 2016 8:55 pm

Image.
Thanks Brad. Dose it look similar to this. Looking for rear water pass through in particular, as at top of this photo.
Tim

Brad1380
Posts: 547
Joined: Wed Apr 27, 2011 1:38 pm

Post by Brad1380 » Sun Jul 24, 2016 11:49 am

Think so, not at home to check but found an Internet picture of one.

Image
1966 Sunbeam Tiger Mk1

tigertim
Posts: 85
Joined: Mon May 25, 2015 11:06 pm
Location: Kent

Post by tigertim » Sun Jul 24, 2016 4:18 pm

Image.

Brad. This is the Torker ll for the 289/302/351W taken from the edelbrock web page. if this is what you have, then we could be in business.
Tim :D

Brad1380
Posts: 547
Joined: Wed Apr 27, 2011 1:38 pm

Post by Brad1380 » Sun Jul 24, 2016 6:34 pm

It probably is I got it off of Brian Postle before he retired.

Can you wait a few weeks until I am home to take a photo of it?

Cheers
Brad
1966 Sunbeam Tiger Mk1

tigertim
Posts: 85
Joined: Mon May 25, 2015 11:06 pm
Location: Kent

Post by tigertim » Sun Jul 24, 2016 8:29 pm

No rush Brad. Just a project I am working on.
Tim :wink:

Post Reply