110.00 USD + 20.00 USD post
For why you want this pulley, read the "Cooling the Sunbeam Tiger" paper by Tiger Tom and Chuck King.
[/url]http://teae.org/cooling-the-sunbeam-tig ... huck-king/
Unfortunately a common Ford pulley will not fit the Tiger, and the Fairmont pulley is very difficult to find today. If you are lucky enough to find a Fairmont pulley, you will find that it is not only expensive, but an ugly 2 or 3 sheave design. Effective as it is, I just did not like the ugly Fairmont pulley on my car, was unable to find an aftermarket alternative, so I set out to make these.
This pulley is CNC machined from a single billet of 6061 T-6 aluminium. With the Tiger specific 1" centre hole, and proper backspacing it is a direct replacement for the stock pulley. Supplied in as machined condition, so you can use as is, or polish, paint, or powdercoat as you prefer.
I have spent 45 years with my eyes glued to the temperature gauge every time I got stuck in traffic and at lights. I tried all the common mods set out out in the referenced paper, and this pulley helped the most in solving my Tigers overheating issues.
A great stealth mod, and most importantly it works and looks great!
Shipped via registered air mail from my home in Thailand, and transit will take about 3 weeks to the UK
Shipping is door to door traceable, and the tracking number is provided the day shipped.
Reduced OD "Fairmont" fan pulley
Reduced OD "Fairmont" fan pulley
Last edited by Hoghead on Tue Sep 26, 2017 6:31 am, edited 1 time in total.
There must be a better way in the post Photobucket era?
Uploading directly from my computer would be nice.......
https://www.flickr.com/photos/158636535 ... res/ET7TK4
https://www.flickr.com/photos/158636535 ... res/f27h0K
https://www.flickr.com/photos/158636535 ... res/L219aa
https://www.flickr.com/photos/158636535 ... res/8w1mCC
Uploading directly from my computer would be nice.......
https://www.flickr.com/photos/158636535 ... res/ET7TK4
https://www.flickr.com/photos/158636535 ... res/f27h0K
https://www.flickr.com/photos/158636535 ... res/L219aa
https://www.flickr.com/photos/158636535 ... res/8w1mCC
Nice pulley. I used a aftermarket alluminium pulley and had aluminium welded to it then re-machined.
I was going to add a pic through image shack BUT it looks as though they are just photofucket as well, so there you go. Perhaps iof everyone removed and closed there accounts from them something may change.
https://imageshack.com/i/idEPSYksj
I was going to add a pic through image shack BUT it looks as though they are just photofucket as well, so there you go. Perhaps iof everyone removed and closed there accounts from them something may change.
https://imageshack.com/i/idEPSYksj