Page 1 of 1

Wanted. edlebrock performer 289 manifold & 260 timing co

Posted: Fri Jul 22, 2016 11:16 pm
by tigertim
Wanted. edlebrock 289 performer inlet manifold, and 260 or early 289 timing cover.

Posted: Sat Jul 23, 2016 1:36 pm
by Brad1380
I've an Eldelbrock Torker 2 spare if thats any help.

Posted: Sat Jul 23, 2016 8:55 pm
by tigertim
Image.
Thanks Brad. Dose it look similar to this. Looking for rear water pass through in particular, as at top of this photo.
Tim

Posted: Sun Jul 24, 2016 11:49 am
by Brad1380
Think so, not at home to check but found an Internet picture of one.

Image

Posted: Sun Jul 24, 2016 4:18 pm
by tigertim
Image.

Brad. This is the Torker ll for the 289/302/351W taken from the edelbrock web page. if this is what you have, then we could be in business.
Tim :D

Posted: Sun Jul 24, 2016 6:34 pm
by Brad1380
It probably is I got it off of Brian Postle before he retired.

Can you wait a few weeks until I am home to take a photo of it?

Cheers
Brad

Posted: Sun Jul 24, 2016 8:29 pm
by tigertim
No rush Brad. Just a project I am working on.
Tim :wink: