Stainless Steel Bumpers

Post any Tech Tips or any matters and questions relating to upkeep
Post Reply
Posts: 120
Joined: Mon Feb 02, 2009 9:57 pm
Location: Coventry, West Midlands

Stainless Steel Bumpers

Post by dpuzey » Tue Mar 23, 2010 11:22 pm

See that these are regularly advertised on eBay, has anybody fitted a set?

Posts: 11
Joined: Fri May 30, 2008 9:26 pm

Post by Growler » Wed Mar 24, 2010 9:38 pm

Hi, I've got a set of these I'll be fitting in the next few weeks.

Overall the manufacturers have done a good job and the finish is very good. Just be aware that the shape is slightly different from the originals (I'll see if it's noticeable when fitted). They're also quite a lot thinner at about 1.5mm thick. I didn't regard this as a problem as it makes the bumpers lighter and in the event of a minor shunt they become sacrificial and bend instead of the chassis rails. That's just my view though!

I can't fault the company for service or speed of delivery, they were very good indeed - and no import duty to pay :D

Hope this helps.....

Post Reply