Intake Manifold Removal.

Post any Tech Tips or any matters and questions relating to upkeep
Post Reply
V Mad
Posts: 141
Joined: Fri Oct 14, 2005 6:21 pm
Location: Surrey
Contact:

Intake Manifold Removal.

Post by V Mad » Mon Oct 29, 2007 11:20 pm

The WSM says to lower the engine at the rear to enable the rear manifold bolt to be removed. This is not necessary, as the manifold can be removed by leaving the bolt in place. Just unscrew it enough to release it from the threads in the head. Then remove all the other bolts and tilt the manifold towards the left side so the bolt clears the head and slide the manifold out.

Saves a bit of time and effort. :)
Chris :-)
1966 Mk1 260 Tiger
!972 Triumph Stag 3.0V8
www.stagweber.co.uk

Post Reply