Page 1 of 1
False boot floor
Posted: Fri Mar 07, 2014 5:45 am
by Mal
What thickness of ply was used for the false boot floor ?
Is the vinyl covering available and also the hardware.
Mine was not there when I bought the car.
Cheers Mal
Floor
Posted: Sun Jun 29, 2014 8:45 pm
by Dom
I just brought one complete from Sunbeam Spares, lovely job. It's 12mm ply but you will need the brackets for mounting it on the brackets.
Posted: Thu Jul 17, 2014 9:22 am
by le tigre
I think 12mm is a bit thick. I am in the process of remaking one myself and understand that the ply was originally 1/4 " or 6.35mm and that is certainly what mine is. As I can only source 5mm or 8mm marine ply I am going to use the 8mm. Hope this helps.
Andy