Post any Tech Tips or any matters and questions relating to upkeep
-
Mal
- Posts: 672
- Joined: Sat Aug 02, 2008 5:39 am
- Location: NZ
Post
by Mal » Fri Mar 07, 2014 5:45 am
What thickness of ply was used for the false boot floor ?
Is the vinyl covering available and also the hardware.
Mine was not there when I bought the car.
Cheers Mal
-
Dom
- Posts: 6
- Joined: Mon Jun 16, 2014 12:27 pm
- Location: Wallingford
Post
by Dom » Sun Jun 29, 2014 8:45 pm
I just brought one complete from Sunbeam Spares, lovely job. It's 12mm ply but you will need the brackets for mounting it on the brackets.
-
le tigre
- Posts: 28
- Joined: Tue May 14, 2013 11:02 am
- Location: S.W.France
Post
by le tigre » Thu Jul 17, 2014 9:22 am
I think 12mm is a bit thick. I am in the process of remaking one myself and understand that the ply was originally 1/4 " or 6.35mm and that is certainly what mine is. As I can only source 5mm or 8mm marine ply I am going to use the 8mm. Hope this helps.
Andy