boot lid hinges

Post any Tech Tips or any matters and questions relating to upkeep
Post Reply
ksherlock
Posts: 91
Joined: Thu Jun 30, 2011 9:25 am

boot lid hinges

Post by ksherlock » Mon Jun 24, 2013 2:30 pm

Could someone tell me how many bolts should attatch the front part of a Tiger boot lid hinge to the body., I can only feel one on each hinge when reaching in from the boot.

meadowhog
Posts: 392
Joined: Fri Dec 16, 2011 1:50 pm
Location: South Bucks

Post by meadowhog » Mon Jun 24, 2013 9:18 pm

Just the one.

martin172
Posts: 1022
Joined: Thu Jul 22, 2010 2:14 pm

Post by martin172 » Mon Jun 24, 2013 11:05 pm

meadowhog wrote:Just the one.
I'll second that.

User avatar
redbaron
Posts: 111
Joined: Sun Aug 16, 2009 6:18 pm
Location: Essex

boot lid hinges

Post by redbaron » Mon Jun 24, 2013 11:14 pm

The boot lid hinge is held onto the body by a 1/4unf threaded stud,use a stud rather than a set screw as you will not strip out the softer threads in the cast hinge when fitting.

alpine5gt
Posts: 109
Joined: Thu Jul 28, 2011 10:08 pm

Post by alpine5gt » Tue Jun 25, 2013 8:16 am

And don't use the replacement rubber hinge gaskets, they slip and you will damage the paint very quickly. Replace them with cork and no slip.

garyv8tiger
Posts: 650
Joined: Sun Dec 30, 2007 10:57 am

Post by garyv8tiger » Thu Jun 27, 2013 7:11 am

simon at sunbeam supreme has the correct wax covered paper gaskets much better than the rubber ones

Tomaselli
Posts: 942
Joined: Fri Sep 30, 2005 2:03 pm
Location: Cheshire, North West England

Post by Tomaselli » Fri Jun 28, 2013 3:46 pm

useful tip, didn't know about paper gaskets :oops:

bernd_st
Posts: 132
Joined: Thu Mar 02, 2006 6:08 pm

Post by bernd_st » Fri Jun 28, 2013 6:12 pm

Still prefer Rick's rubber ones. They are self-adhesive on the underside and will never move once installed...

alpine5gt
Posts: 109
Joined: Thu Jul 28, 2011 10:08 pm

Post by alpine5gt » Sat Jun 29, 2013 6:47 am

bernd_st wrote:Still prefer Rick's rubber ones. They are self-adhesive on the underside and will never move once installed...
Sorry, newer ones maybe, mine did move, result a big paint chip.

meadowhog
Posts: 392
Joined: Fri Dec 16, 2011 1:50 pm
Location: South Bucks

Post by meadowhog » Sat Jun 29, 2013 9:30 am

Mine have moved, with usual mess. They are a type of vinyl. Is there a best solution?

alpine5gt
Posts: 109
Joined: Thu Jul 28, 2011 10:08 pm

Post by alpine5gt » Sat Jun 29, 2013 9:47 am

I think a previous post about waxed paper may be good, others say a thin cork gasket will also stop the dreaded slip.

garyv8tiger
Posts: 650
Joined: Sun Dec 30, 2007 10:57 am

Post by garyv8tiger » Sat Jun 29, 2013 12:49 pm

rubber ones are useless .originals are waxed covered paper

meadowhog
Posts: 392
Joined: Fri Dec 16, 2011 1:50 pm
Location: South Bucks

Post by meadowhog » Sat Jun 29, 2013 1:07 pm

I remember an Alpine that won the wooden spoon award back in the 80's. It had 6" nails holding it together. :lol:

garyv8tiger
Posts: 650
Joined: Sun Dec 30, 2007 10:57 am

Post by garyv8tiger » Sat Jun 29, 2013 10:09 pm

meadowhog wrote:I remember an Alpine that won the wooden spoon award back in the 80's. It had 6" nails holding it together. :lol:
tomasellies tiger is like that :lol:

Post Reply