Anyone has ideas about best way to fit radiator with flexible mounts?
Currently using short pieces of silicone hose to give some flexibility but is there a better way?
Also adding flexible spacers between rad brackets and body shell brings the rad very close to the steering rack. Ideas?
Radiator mounts
Try Concept Racing, they sold a rubber bobbin type radiator mount.
http://www.conceptracing.co.uk/sunbeam- ... -radiator/
Lou.
http://www.conceptracing.co.uk/sunbeam- ... -radiator/
Lou.
65 Mk1 Tiger 260
66 Mk1 Tiger 260 (African Violet)
63 Ford Falcon Sprint
63 Ford Falcon Monte Carlo Rally replica
02 Honda Valkyrie
66 Mk1 Tiger 260 (African Violet)
63 Ford Falcon Sprint
63 Ford Falcon Monte Carlo Rally replica
02 Honda Valkyrie
Mounting alu rad
If it is any help I had this problem, and this was my solution. With an oversize fan there was not enough space to use bobbin mounts. I drilled out the mounting holes in the body and inserted rubber rivnuts which have a relatively thin flange. I was as worried about galvanic action on the alu rad as I was about vibration. With 13.5V going through an alu rad which was 'connected' to the steel frame I was sure the rad core would dissolve in time. I would welcome any thoughts on this.
Andy
Andy