Brads Tiger

Post your questions or information about Tiger restorations
Posts: 478
Joined: Wed Apr 27, 2011 1:38 pm

Re: Brads Tiger

Post by Brad1380 » Sun Feb 09, 2020 6:21 pm

Put a temporary wooden cross member in with a heavy welder hing off of it to stabilise the front, had to re-tap the holes due to the new paint and this extended wrench was perfect for the job. ... D.jpg?dl=0

Hell of job getting this in place, its very heavy and awkward, thought i could use the old U-bolts but when i put a gauge against the treads they are past it so new ones needed. ... 8.jpg?dl=0

Thought i'd finish off with an easy job, the dash vents, except all the old #8 screws are sheared off, my fault for not looking before paint but now a rather tricky job of drilling the old ones out.
1966 Sunbeam Tiger Mk1a

Posts: 43
Joined: Mon Apr 21, 2008 6:29 pm

Re: Brads Tiger

Post by tgr747 » Mon Feb 10, 2020 11:10 am

Looking good.

Posts: 669
Joined: Sat Aug 02, 2008 5:39 am
Location: NZ

Re: Brads Tiger

Post by Mal » Sat Feb 15, 2020 5:03 am

It's looking good Brad. Happy days putting it back together. Love the colour but it won't be quite as fast as the red tigers. :wink:

Post Reply