Tremec Gearbox from recent Mustang
Tremec Gearbox from recent Mustang
Saw this classified ad on ebay:
http://cgi.ebay.co.uk/Tremec-Gearbox-4- ... 4aa7c7b982
This gearbox may not fit the Tiger without a lot of metal bashing and other mods, but the price sounds reasonable.
http://cgi.ebay.co.uk/Tremec-Gearbox-4- ... 4aa7c7b982
This gearbox may not fit the Tiger without a lot of metal bashing and other mods, but the price sounds reasonable.
You are right, with a long gearbox you'd need to chop an awful lot of metal out.
Or you could run with the popular "short" T5 conversion they now use on the E-Type Jag, though a bit pricey at £3k - but there would be very little metal to modify on a Tiger tunnel
http://www.eliteracingtransmissions.com ... ad/jag-t5/
Or you could run with the popular "short" T5 conversion they now use on the E-Type Jag, though a bit pricey at £3k - but there would be very little metal to modify on a Tiger tunnel
http://www.eliteracingtransmissions.com ... ad/jag-t5/
I don't think the T5 is a particulary strong trans if you are going to put it behind a strong V8. Be fine behind a stock 260-289 or mildly modified, but aren't they pulled form mustangs when they bump up the power.
I have a Tremac sitting on the shed floor that I considered using in the Tiger, but I didn't want to cut the car to fit it, and the expense. I also like the toploaders long first gear and the reverse lock out lever that looks so . I think if we modify them to much we lose the cars character.
I have a Tremac sitting on the shed floor that I considered using in the Tiger, but I didn't want to cut the car to fit it, and the expense. I also like the toploaders long first gear and the reverse lock out lever that looks so . I think if we modify them to much we lose the cars character.
-
- Posts: 438
- Joined: Thu Jun 21, 2007 8:35 am
- Location: Melbourne Australia
- Contact:
Mal,Mal wrote:I don't think the T5 is a particulary strong trans if you are going to put it behind a strong V8. Be fine behind a stock 260-289 or mildly modified, but aren't they pulled form mustangs when they bump up the power.
I have a Tremac sitting on the shed floor that I considered using in the Tiger, but I didn't want to cut the car to fit it, and the expense. I also like the toploaders long first gear and the reverse lock out lever that looks so . I think if we modify them to much we lose the cars character.
I get where you are coming from not wanting to cut the body.. im a big stickler for keeping sheet metal stock.. the tom hall kit I thought was the ticket as it's rumored to not require cutting.. but.. it does require a bit of tunnel bashing which is a bit of a dissapointment.
As for the original close ratio box.. i got ot say.. i would like to go the wide ratio.. the C/R is great on the track.. but on the stree its a pain.. you cant have any fun through the gears without putting your liscence on the line.. i mean you do 4000+ in first and your going to be taking an enforced break from driving... would love to have a 5 speed top loader and a 3.54 or 3.73 rear.
Michael.
A bit of tunnel bashing is not to bad if you really want the 5th gear.
I just couldn,t see the point of cutting the car for the tremac to gain the extra gear and losing the appeal of the toploaders gear levers asthetics.
The cost of doing it would take a long time to recoup through fuel savings.
A bit of tunnel bashing is not to bad if you really want the 5th gear.
I just couldn,t see the point of cutting the car for the tremac to gain the extra gear and losing the appeal of the toploaders gear levers asthetics.
The cost of doing it would take a long time to recoup through fuel savings.
Hey, I live in the countryyou cant have any fun through the gears without putting your liscence on the line.. i mean you do 4000+ in first and your going to be taking an enforced break from driving.
-
- Posts: 438
- Joined: Thu Jun 21, 2007 8:35 am
- Location: Melbourne Australia
- Contact:
I had a T5 from a TVR, where the gear lever came up same line as top loader, but central in tunnel so only minor cutting needed. Was a good compromise with first 4 gears similar to Tiger, but relaxed cruising in 5th on road trips. Good for about 350 bhp. Now have Tremec in which did need cutting of crossmember, good for 500 bhp & 2500revs at 100mph in 5th!
I have a tremec T5 in my tiger with now a 357 stroker. I do not think about the gearbox, as the Tiger is really light and with our tires, the grip is also limited. The gearbox had absolutely no problem with the 331 stroker, I had before.
You have to convert the rear case of the T5 with a case from a S10 gearbox. Not too much work but then you must only cut a hole in the tunnel, round about 2" in front of the original hole and of course in the middle.
The box shifts better than the old one and the 5th gear is absolutelly perfect. You can drive really high speeds for a longer time without any problem.
There are many T5 boxes on the market, with different gearsets and strength. The actually T5, as sold from summit racing is really strong. If you wont more, you have to build it with a gforce gearset.
But, as already told, with our light car there is no problem. And, to think about, the gforce gearset is "loud".
regards
Hans
You have to convert the rear case of the T5 with a case from a S10 gearbox. Not too much work but then you must only cut a hole in the tunnel, round about 2" in front of the original hole and of course in the middle.
The box shifts better than the old one and the 5th gear is absolutelly perfect. You can drive really high speeds for a longer time without any problem.
There are many T5 boxes on the market, with different gearsets and strength. The actually T5, as sold from summit racing is really strong. If you wont more, you have to build it with a gforce gearset.
But, as already told, with our light car there is no problem. And, to think about, the gforce gearset is "loud".
regards
Hans
Sunbeam Tiger MK1 with 357 strokerengine, really funny.