Hi,
Does anyone know of a source for extended wheel studs for the Tiger? The original ones aren't long enough for my alloy wheels to allow a minimum of 1 x diameter engagement with the wheel nuts.
All the 7/16 UNF studs I can find have a larger spline diameter than the Tiger ones and I'd rather not drill out the holes in the rear hubs. It doesn't seem a good idea to weaken the hub when it's got all that V8 torque going through it...
Any help would be appreciated,
Cheers!
Wheel Studs
Thanks for the responses.
I've ended up using the Ford studs, 55mm long are right for my wheels and give plenty of thread engagement. You can get them from Demon Tweeks, Rally Design, Europa Spares etc.
For anyone else contemplating using these, you'll have to drill the hubs out to 1/2" diameter taking care to keep the holes parallel to the half-shaft axis. You don't want to end up with drunken studs!
I found that pressing the studs into the hubs took about 2 tonnes, so a press is a useful aid.
Cheers!
I've ended up using the Ford studs, 55mm long are right for my wheels and give plenty of thread engagement. You can get them from Demon Tweeks, Rally Design, Europa Spares etc.
For anyone else contemplating using these, you'll have to drill the hubs out to 1/2" diameter taking care to keep the holes parallel to the half-shaft axis. You don't want to end up with drunken studs!
I found that pressing the studs into the hubs took about 2 tonnes, so a press is a useful aid.
Cheers!