I read somewhere in the past about fitting a duel master to the Tiger. I fitted the recommended one however it fowls the throttle linkage.
I know this would not happen with LHD cars but it does with RHD.
Any suggestions or options to fit a duel master brake cylinder?
Search found 103 matches
- Fri May 01, 2015 6:06 am
- Forum: Tech Tips
- Topic: duel braking system
- Replies: 0
- Views: 6113
- Mon Apr 27, 2015 6:09 am
- Forum: Tech Tips
- Topic: Converting the steering column
- Replies: 11
- Views: 17045
Well its been almost 12 months and no replies. Now I know some people have had their Tigers converted to EPAS steering. I now have a alpine downer column, a doner EPAS unit and the Tiger column to provide a yardstick of the final length. Now before I approach an engineering firm with the work to fit...
- Fri Apr 17, 2015 5:05 am
- Forum: Sunbeam Tiger
- Topic: Mounting brake booster
- Replies: 3
- Views: 6659
- Thu Apr 16, 2015 8:11 pm
- Forum: Sunbeam Tiger
- Topic: Mounting brake booster
- Replies: 3
- Views: 6659
- Thu Apr 16, 2015 7:53 am
- Forum: Sunbeam Tiger
- Topic: Mounting brake booster
- Replies: 3
- Views: 6659
Mounting brake booster
The usual position of the booster up on the inner fender will not fit with a LAT bonnet. I have seen many Tigers with LAT bonnets so am wondering where the brake booster is fitted.
- Sun Apr 05, 2015 9:08 pm
- Forum: Classifieds - Parts
- Topic: WTB: MK2 RHD Wiring Loom
- Replies: 5
- Views: 9811
- Fri Mar 20, 2015 10:36 pm
- Forum: Tech Tips
- Topic: speedo cable position
- Replies: 1
- Views: 4753
speedo cable position
How is the speedo cable routed thru the firewall on a RHD tiger. On LHD tigers it enters thru a 1" hole above the steering shaft. When converting a LHD to RHD there is no hole above the steering shaft. Also can the cable be passed above the gearbox to enter on the rhs of the firewall?
- Mon Mar 16, 2015 5:29 am
- Forum: Tech Tips
- Topic: Brembo caliper's
- Replies: 76
- Views: 114496
- Thu Aug 28, 2014 1:54 am
- Forum: Sunbeam Tiger
- Topic: 50th Anniversary Tiger Book
- Replies: 38
- Views: 58137
- Mon Jun 16, 2014 7:09 am
- Forum: Tech Tips
- Topic: Converting the steering column
- Replies: 11
- Views: 17045
Converting the steering column
I know someone has used the Opel EPAS steering column to provide power boosted steering to the Tiiger. I would like to go down this path so if anyone can help with information or guidance, I would be very grateful
I am down under in Aussie land so need the help long distance.
Steven
I am down under in Aussie land so need the help long distance.
Steven
- Wed Mar 19, 2014 10:06 am
- Forum: Tech Tips
- Topic: Engine Rebuild
- Replies: 7
- Views: 13468
The 260 block cannot be bored to 289 and be expected to run well. The ford block is a thinwall block and if the rebore was successful the cylinder walls are now so thin the block is slated for a very short life. Fitting the 289 5 bolt is the best way to go. As a matter of fact, the only way to go wi...
- Wed Mar 19, 2014 12:44 am
- Forum: Sunbeam Tiger
- Topic: STOC National + Silverstone Classic
- Replies: 16
- Views: 28169
- Tue Dec 24, 2013 10:52 pm
- Forum: Tech Tips
- Topic: Drilling wings for Tiger strips?
- Replies: 6
- Views: 11546
Think I have sorted it? My original Tiger door has a hole 3" from the front edge then a hole every 6.5" Rear wing I measured 1.5" in from front edge then marked for a hole. Then mark every 6.5" and the last hole is approximately 1.5" from the edge of the sunbeam sheild. Just the front wings to sort...
- Tue Dec 24, 2013 1:23 am
- Forum: Tech Tips
- Topic: Drilling wings for Tiger strips?
- Replies: 6
- Views: 11546
- Fri Dec 20, 2013 11:14 am
- Forum: Tech Tips
- Topic: Drilling wings for Tiger strips?
- Replies: 6
- Views: 11546