Search found 524 matches
- Thu Apr 29, 2021 6:42 pm
- Forum: Sunbeam Tiger Restorations
- Topic: Brads Tiger
- Replies: 568
- Views: 1369704
Re: Brads Tiger
Started on the exhaust, bit of a head warp but going slowly, measure 5 times cut once. First off was to make sure all the brackets fitted which they didn't. https://www.dropbox.com/s/juh8wf7yls83is9/IMAG6917.jpg?dl=0 Then starting from the rear heading forwards, i'll chop the tail pipes to length la...
- Thu Apr 29, 2021 7:02 am
- Forum: Sunbeam Tiger
- Topic: Stadium Type Mirrors
- Replies: 2
- Views: 6922
Re: Stadium Type Mirrors
I fitted some, see page 35 of my thread.
You can get them with flat or convex glass brand new from Halcyon classic parts.
You can get them with flat or convex glass brand new from Halcyon classic parts.
- Sun Apr 25, 2021 7:17 am
- Forum: Sunbeam Tiger Restorations
- Topic: Brads Tiger
- Replies: 568
- Views: 1369704
Re: Brads Tiger
Refurbished the seats, they were rather on the tired side. https://www.dropbox.com/s/xktjk51i5g341ng/IMAG5842.jpg?dl=0 This one even had a home made spring base with old clutch springs https://www.dropbox.com/s/bjd1newn0ep92d3/IMAG5858.jpg?dl=0 Painted all the parts https://www.dropbox.com/s/wm29g5t...
- Sat Jan 30, 2021 6:56 pm
- Forum: Classifieds - Tigers For Sale & Wanted (In preparation)
- Topic: Wanted reverse mirror and sun visor brackets
- Replies: 1
- Views: 7360
Wanted reverse mirror and sun visor brackets
Does anyone have a reverse mirror or sunvisor brackets going spare?
Cheers
Brad
Cheers
Brad
- Wed Jan 27, 2021 8:05 am
- Forum: Sunbeam Tiger Restorations
- Topic: Brads Tiger
- Replies: 568
- Views: 1369704
Re: Brads Tiger
I'm using Solarflux paste.
- Mon Jan 25, 2021 9:32 pm
- Forum: Sunbeam Tiger Restorations
- Topic: Brads Tiger
- Replies: 568
- Views: 1369704
Re: Brads Tiger
Yes and no, i've been teaching myself S/S Tig welding for the exhaust...not pretty so far.
- Sun Jan 24, 2021 5:51 pm
- Forum: Sunbeam Tiger Restorations
- Topic: Brads Tiger
- Replies: 568
- Views: 1369704
Re: Brads Tiger
I really hope so, i've been laid off 3 times in the last 5 years so funds have been tight, but i have another job now. To finish it off: Exhaust Hood Door cards, luckily i have the GT ones not the cheapo Mk1's. Sunvisor brackets Seats Tyres Fit the brakes Big battery Commission all the systems There...
- Fri Jan 22, 2021 6:46 pm
- Forum: Sunbeam Tiger Restorations
- Topic: Brads Tiger
- Replies: 568
- Views: 1369704
Re: Brads Tiger
Hi Gary, i got the bulkhead swivel parts, rod and arms, but they didn't give WOT, so played around with the pedal height, pedal throw and various arcs to give the required amount of travel at the carb, took much longer than i thought it would. Some of the rod linkages needed shortening other making ...
- Thu Jan 21, 2021 7:47 pm
- Forum: Sunbeam Tiger Restorations
- Topic: Brads Tiger
- Replies: 568
- Views: 1369704
Re: Brads Tiger
Had a lot of challenges with the throttle linkage, trying to get WOT with the limited pedal travel, but got there in the end. Also hosing up had problems due to the carb and the different manifold, again took much longer to sort out than i wanted but go there in the end. Think i should have gone wit...
- Mon Dec 21, 2020 2:06 pm
- Forum: Sunbeam Tiger Restorations
- Topic: Brads Tiger
- Replies: 568
- Views: 1369704
Re: Brads Tiger
Thanks Mal,
that's where is ended up routing it, will check again to see if i need to fit heat sleeving.
Cheers
Brad
that's where is ended up routing it, will check again to see if i need to fit heat sleeving.
Cheers
Brad
- Fri Nov 13, 2020 6:08 pm
- Forum: Sunbeam Tiger Restorations
- Topic: Brads Tiger
- Replies: 568
- Views: 1369704
Re: Brads Tiger
Can anyone help with the routing of the speedo cable on a RHD car, not too sure how it gets past the exhausts to the speedo.
- Sun Nov 08, 2020 5:16 pm
- Forum: Sunbeam Tiger Restorations
- Topic: Brads Tiger
- Replies: 568
- Views: 1369704
Re: Brads Tiger
Managed to recover the generator pulley, the shaft insert was a bit twisted, went from 64 thou run out to 1-1/2 thou which i thought was the best i was going to achieve, slowly slowly is the best way and keep resetting the fan blades as that affects the whole thing. https://www.dropbox.com/s/1tfd1s2...
- Sat Nov 07, 2020 7:29 pm
- Forum: Sunbeam Tiger Restorations
- Topic: Brads Tiger
- Replies: 568
- Views: 1369704
Re: Brads Tiger
Took a look at the seats which have been up in the attic, the bottoms are shot, diapram rubbers, foam, most of the fasteners resisted to the point of destruction and the cover bottoms have been previously repaired, the seat backs are all good though. So need to find some good seat bottoms if anyone ...
- Tue Oct 27, 2020 7:14 pm
- Forum: Sunbeam Tiger Restorations
- Topic: Brads Tiger
- Replies: 568
- Views: 1369704
Re: Brads Tiger
Anti roll bar wasn't going in easy with poly bushes, need some adjusting to get enough movement on the clips. https://www.dropbox.com/s/75fhouz8lf0phey/IMAG5737.jpg?dl=0 https://www.dropbox.com/s/jig8qgtwqil1pri/IMAG5784.jpg?dl=0 Thought getting the gaitor on was going to be a bit of a job but once ...
- Tue Oct 27, 2020 6:56 pm
- Forum: Sunbeam Tiger Restorations
- Topic: Brads Tiger
- Replies: 568
- Views: 1369704
Re: Brads Tiger
Trial fit of the windscreen went ok this time, took nearly a whole day though to get the hood frame to latch into it without putting any stress into the windscreen frame. https://www.dropbox.com/s/y6jo40rxnewzgyg/IMAG4973.jpg?dl=0 Actually this was on and off another 30 or so times to get everythin...