Search found 278 matches
- Fri May 03, 2013 10:57 pm
- Forum: Tech Tips
- Topic: Throttle linkage
- Replies: 11
- Views: 19498
There are so many parts listed, could you post a final list of all the bits you ended up using and pix of the finished product. I have just had my throttle linkage transformed. Full throttle is now available on the primaries, plus the secondaries work as well! I had the following work done: New sle...
- Mon Apr 22, 2013 8:02 pm
- Forum: Tech Tips
- Topic: Throttle linkage
- Replies: 11
- Views: 19498
Can anyone tell me the size of the holes in the two throttle linkage brackets bolted to the firewall. Also can anyone recommend a supplier of nylon bushes/grommets to fit these holes. The original steel rod had a 3/8 inch diameter. Stainless steel replacements will be metric (10 mm) unless you have...
- Sun Apr 21, 2013 11:02 am
- Forum: Tech Tips
- Topic: Throttle linkage
- Replies: 11
- Views: 19498
Alternatively, you could dispense with all the linkage, modify the accelerator pedal action to suit and fit a throttle cable/bike brake cable with adjustable ends. If you send a PM to bigbob, he has the details plus some photos. If you ask him nicely, and he is in a good mood, he may even post them ...
- Sun Apr 21, 2013 9:08 am
- Forum: Tech Tips
- Topic: Throttle linkage
- Replies: 11
- Views: 19498
I will do my best to get a list of all the parts plus some photos. Prior to this I had already replaced the main rod along the firewall with a 10 mm stainless steel one and 2 nylon bushes. If you are changing your carb, do a trial fit first because the new s/s rod may need to be longer than the orig...
- Thu Apr 18, 2013 4:48 pm
- Forum: Tech Tips
- Topic: Rolling road in West Wales
- Replies: 1
- Views: 4610
Rolling road in West Wales
If you want your Tiger's engine set up correctly, I can strongly recommend a session on Vince Mosley's rolling road at: Mosleys Garage The Old Creamery Ffairfach Llandeilo Carmarthenshire SA19 6UH http://www.mosleysgarage.co.uk/index.asp Tel: 01558 823 368 Email: enquiries@mosleysgarage.co.uk Vince ...
- Wed Apr 17, 2013 9:33 am
- Forum: Tech Tips
- Topic: Throttle linkage
- Replies: 11
- Views: 19498
Throttle linkage
I recently discovered that the throttle was only opening half-way on my Edelbrock carb's primaries. The secondaries were not opening at all. This was due to the amount of wear/slop in the umpteen rods that constitute the Tiger's throttle linkage from pedal to carb. I am in the process of replacing a...
- Wed Apr 17, 2013 7:33 am
- Forum: Tech Tips
- Topic: V8F oil filter
- Replies: 2
- Views: 5219
- Tue Apr 16, 2013 4:06 pm
- Forum: Classifieds - Parts
- Topic: BRAND NEW Big Brakes for sale-V6 Peugeot **SOLD**
- Replies: 0
- Views: 6165
BRAND NEW Big Brakes for sale-V6 Peugeot **SOLD**
FOR SALE-Big brakes. ****SOLD***** Change of plans (decided to keep OEM brakes) forces sale of brand NEW Peugeot V6 brake discs, calipers and pin kit: Drilled, grooved, vented brake discs (pair) 282 mm diameter, 4 stud. £140 Pair of quality reproduction calipers manufactured by Budweg in Denmark an...
- Tue Apr 16, 2013 4:03 pm
- Forum: Tech Tips
- Topic: Brembo caliper's
- Replies: 76
- Views: 113878
I can only second bigbob's recommendation of swapping the 260 for a 302. Have a word with Real Steel about one of their 302 engines: www.realsteel.co.uk The Edelbrock Performer RPM heads have 1.90 inch inlets and 1.60 exhausts. http://www.summitracing.com/parts/edl-60229 The problem is that these he...
- Fri Apr 12, 2013 2:35 pm
- Forum: Tech Tips
- Topic: Replacing transmission front oil seal
- Replies: 6
- Views: 9480
If it is definitely NOT leaking from higher up (PCV valve, rocker covers or rear of inlet manifold) and the oil is on the FRONT face of the engine plate, it is probably the sump gasket end seal. If the front of the engine plate is DRY and there is oil dripping from the joint between this plate and t...
- Fri Mar 29, 2013 4:17 pm
- Forum: Tech Tips
- Topic: C3AZ-7515-A Clutch fork
- Replies: 4
- Views: 8368
- Fri Jul 06, 2012 10:42 am
- Forum: Tech Tips
- Topic: Tracking On A Tiger
- Replies: 6
- Views: 9850
- Thu Jul 05, 2012 9:33 am
- Forum: Tech Tips
- Topic: Tracking On A Tiger
- Replies: 6
- Views: 9850
- Tue Jul 03, 2012 3:11 pm
- Forum: Tech Tips
- Topic: Tracking On A Tiger
- Replies: 6
- Views: 9850
Tim, I suggest that you find a local garage that has the proper tracking equipment, such as the Dunlop Optical Tracking Alignment Gauge. Before you go, it is best to do a few checks yourself first. My standard Tiger rack has 3.25 turns from full lock to full lock. I guess that your one is the same. ...