sunbeamtiger.co.uk

Hi guys, Has anyone fitted mx5 seats to there tiger? If so what year was the doner mx5? ive found these... http://www.ebay.co.uk/itm/Mazda-Mx5-Mk2-Cloth-Seats-/271561274605?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item3f3a5034ed just wondered if theyd do the trick as a temporary option for the mont...

Hi guys,
had another look at the car this evening. Rather embarrassingly the pickup underneath the rotor arm had come adrift and wasnt located properly
After refiting that I now have spark back!
Thanks Dave and Mal for the replies.

That being the petronix box inside the distrubutor? Again I have 11.8 volt feed to that but 5volts coming from the negative.... which cant be right!.

I should mention that it started and ran for about 5 mins whilst I tryed to sort the misfire. Now it wont stard at all.

New crate 302 engine fitted, started ok, idle ok. Misfired when revving (could be fuel) float is level, mixture screws have been adjusted so it could atleast start ok. And getting fuel out of jets. ●check spark to spark plug with spare plug on plug lead. No spark! ●checked power to coil,...

Hi David, sorry for the late reply and thankyou for your advice the car is now running with a 302 front cover and alloy water pump. I did press the hub down the shaft about 8mm, it now sits in line with the crank and alternator. No need to cut off the excess as I figured I would just look ugly and s...

Hi David,

does the later timing cover come out the same distance as the original with the water pump attached?

tom.

Hi guys, i'm Fitting a 302 into my tiger. The engine is a 302 50oz balance crankshaft....im having real trouble finding a balance that fits the 260 timing cover. Ive tried realsteel, custom ville and essex mustang centre... the only other option I have is to fit a 302 timing cover and waterpump, and...

Technically yes...but why go through effort. When someone sells them .

I shall speak to Andy on Wednesday, thankyou!

That link doesnt seem to work?

Anyone know of a kit the can be purchased to bring the back of the car down??

Thankyou, Been in touch with california Tigers, the shipping price is unfortunatly the same as the purchase price! Aswell as a joining fee of $40.
It does look like this will be my only choice!

Hi guys, anyone got any second hand or know of any stainless tubular manifolds that fit the tiger? 4-2-1 if possible? I know a tiger from Switzerland runs that set up...any help would be greatly appreciated as the tigers having a 302 for 2014 ,
Cheers, Tom