Search found 42 matches

by 0neoffive
Mon Jan 18, 2016 4:39 pm
Forum: Sunbeam Tiger Restorations
Topic: Cross member
Replies: 30
Views: 54841

Nice clean work

FYI: I often find the lower fulcrum pivots have been installed backwards by unknowing garage techs. The shorter distance from the notch to the bushing faces forward. another 2-cents
by 0neoffive
Thu Jan 14, 2016 1:42 am
Forum: Sunbeam Tiger Restorations
Topic: Cross member
Replies: 30
Views: 54841

Beef It Up

Randy. By making the filler in three parts I was able to shape the vertical section as a one piece gusset which runs from the inner lower bulkhead to just beyond chassis bolt holes and runs just beside the access hole in the bottom and welded all the way. all in 2mm plate, hope that makes sense. Ti...
by 0neoffive
Thu Jan 14, 2016 12:06 am
Forum: Sunbeam Tiger Restorations
Topic: Cross member
Replies: 30
Views: 54841

More Input

We always place an extra surface plate over the thin area just below the track rod detents. Both perimeter welded and button hole welds for strength. Be sure to hammer shape the piece into the indent area where the lower wish bone fulcrum mounts.
by 0neoffive
Mon Jan 11, 2016 3:43 pm
Forum: Classifieds - Parts
Topic: Wanted Crankshaft Oil Slinger
Replies: 7
Views: 13085

Re: Wanted Crankshaft Oil Slinger

redbaron wrote:Hi Stuart,
I can help you out with the oil slinger,contact me for details.
David
Glad that you lads can work it out . . . . .
by 0neoffive
Mon Jan 11, 2016 5:42 am
Forum: Classifieds - Parts
Topic: Wanted Crankshaft Oil Slinger
Replies: 7
Views: 13085

Counted Out

0neoffive wrote:
stuartb wrote:Hello Randy,

Used would be fine as long as its serviceable.

Thankyou
Stuart
I'll shovel under the work bench for ya . . . . .
Mine are counted to current projects, but, I found some new in a Ford obsolete warehouse at $23.00 plus shipping.
by 0neoffive
Tue Jan 05, 2016 4:16 am
Forum: Sunbeam Tiger Restorations
Topic: Cross member
Replies: 30
Views: 54841

Play Safe

Martin. Update on the cross member. I spoke with Randy today and got the measurements required. Bad news is that I have a bent cross member which is out by 1/2-3/4" across the shock towers which would account for no shims that side. Good news, I have a complete Alpine Cross member I found 5 miles f...
by 0neoffive
Sat Jan 02, 2016 11:52 pm
Forum: Classifieds - Parts
Topic: Gearstick - Wanted
Replies: 4
Views: 9084

Re: Shiftless

0neoffive wrote:PM sent. I have a few remaining in the loft. . . . . .
OK: I did the search in the loft attic and yes, I have two nice new short post shifters left. These came in the original MK1 and work great in the later MK 1A also. PM me for available pricing/shipping/etc.
randy
by 0neoffive
Thu Dec 31, 2015 8:11 pm
Forum: Classifieds - Parts
Topic: Gearstick - Wanted
Replies: 4
Views: 9084

Shiftless

PM sent. I have a few remaining in the loft. . . . . .
by 0neoffive
Thu Dec 31, 2015 8:05 pm
Forum: Classifieds - Parts
Topic: Wanted Crankshaft Oil Slinger
Replies: 7
Views: 13085

stuartb wrote:Hello Randy,

Used would be fine as long as its serviceable.

Thankyou
Stuart
I'll shovel under the work bench for ya . . . . .
by 0neoffive
Thu Dec 31, 2015 4:37 am
Forum: Classifieds - Parts
Topic: Wanted Crankshaft Oil Slinger
Replies: 7
Views: 13085

Re: Wanted Crankshaft Oil Slinger

stuartb wrote:Has anyone got a spare Crankshaft Oil Slinger for a 260 or 289?
Original part no C3OZ-6310-B

Mine is missing.

Thankyou
Stuart
Do you want new or used ? randy
by 0neoffive
Thu Dec 31, 2015 4:16 am
Forum: Classifieds - Parts
Topic: Gearstick - Wanted
Replies: 4
Views: 9084

Re: Gearstick - Wanted

Hi, I have, what I think, is a Mustang gearstick in my Tiger. Whatever it is its longer than the Tiger stick. I have borrowed one to compare and see if i could cut mine down to create a Tiger stick. Whilst it can be done it strikes me that it might end up becoming a pain and taking the car off the ...
by 0neoffive
Fri Apr 17, 2015 8:52 am
Forum: Classifieds - Parts
Topic: MK II Tiger Alternator Brackets
Replies: 0
Views: 6752

MK II Tiger Alternator Brackets

We have an opportunity to do a short run recast of the MK II alternator bracket, as original, in high strength aluminum. The minimum order for 11 of them would run $4,600.00. The initial pattern and core boxes are the high costs, while the actual raw casting is a bargain. Machining eats up a few mor...
by 0neoffive
Wed Mar 11, 2015 5:00 am
Forum: Classifieds - Parts
Topic: Bonnet Wanted
Replies: 4
Views: 8779

Fiberglass Bonnets

bigbob wrote:Any contact details for Jeff?
Try < jeff.v8tiger@gmail.com >
by 0neoffive
Mon Mar 09, 2015 8:47 pm
Forum: Classifieds - Parts
Topic: Bonnet Wanted
Replies: 4
Views: 8779

Re: Bonnet Wanted

bigbob wrote:Wanted Plain fibreglass bonnet, NOT LAT.
Does such a thing exist?
Ta Bob
Jeff Howarth supplied us with excellent examples. Kent Wilcox in the States makes about the best I've seen, but shipping !!!!!
by 0neoffive
Mon Mar 09, 2015 8:40 pm
Forum: Classifieds - Parts
Topic: Various Parts Wanted
Replies: 12
Views: 20633

Re: Various Parts Wanted

Hello my name is Stuart, this is my first post. I have a 1965 mk1 Tiger 260 RHD (project), below is a list of parts I am missing if anyone has any going spare. R/H Exhaust Manifold. Header Tank. Radiator bottom hose Aluminium section. Radiator. Gear Stick. Servo. Air Filter Top & Bottom Plates. Fro...